TL;DR: General Die Casters has decades of die cast tool design experience. We utilize numerous forms of software to develop manufacturable solutions.
High-Level Die Cast Tool Design Where Accuracy, Precision, and Manufacturability Matter Most
A well-designed die helps control metal flow, cooling, ejection, part quality, and ultimately, the life of the tool. At General Die Casters, our tooling engineers use 3D modeling and flow simulation to identify potential issues with the die design before the tool goes into production.
Our engineers work with your team on new tools, design reviews, and modifications. Part geometry, alloy, and expected volume are all considerations used to approach dies. Flow simulation helps our engineers evaluate metal flow and determine whether adjustments to runners, vents, or cooling could improve casting performance. Working with a small group of expert toolmakers, we design the die in 3D, verify that every feature will function as expected, and manage the build so the finished tool meets your specifications.
Contact General Die Casters to start a die cast tool design review for your next manufacturing program by hitting the button below. Continue reading for more information on our tooling engineering process and how we can serve your team.
Design for Manufacturability Reviews
Die cast tool design begins with the part itself. General Die Casters reviews new and existing part designs to identify any potential issues before your team invests in a die.
A 3D CAD model, a dimensioned drawing, your proposed alloy, expected annual volume, and program life are all acceptable forms of DFM review material we can investigate. Marking critical tolerances, cosmetic surfaces, machined features, and any leak-testing or pressure-tightness requirements helps our engineers account for them from the very start.
Our recommendations focus on the details that drive tool performance and cost, including consistent wall thickness, enough draft, rounded corners, and avoiding unnecessary undercuts and complicated parting lines. Features that leave thin steel sections in the die can wear quickly and increase maintenance costs, so we flag them early in the process.
MAGMASOFT Flow Simulation for Gating, Venting, and Cooling
As part of our die cast tool design process, General Die Casters uses MAGMASOFT simulation to model how aluminum fills and solidifies in the die.
Our engineers use the results to evaluate runners, vents, and cooling before building or modifying tooling. Finding gating, venting, and cooling issues in the software helps limit porosity and keep it away from critical areas, which supports castings that are ready for machining and pressure-tight applications.
Simulation is then paired with real-world validation. Die sampling can include infrared imaging to confirm die temperature, real-time X-ray to examine internal soundness, and dimensional checks of critical features, so the tool is proven before production begins.
Cavitation, Slides, and Tool Configuration
Cavity count can have a major impact on both tooling costs and piece costs. For high-volume parts, more cavities usually lower the piece price and total project cost, but the die costs more up front and may require a larger machine. For complex or lower-volume parts, fewer cavities often cost less over the life of the program.
Part complexity shapes the tool as well. Slides and moving cores make internal features possible, but multiple slides limit how many cavities fit in the die, and each added cavity makes dimensional consistency harder to control. There isn’t one ideal cavity count for every job. Our engineers look at part size and complexity alongside annual volume and expected program life when laying out the die.
Our tooling engineering also covers the tools that support the casting itself. This includes trim dies that remove runners, overflows, and flash from the casting, as well as CNC machining fixtures when secondary operations are required.
Tool Build Management and In-House Tool Room
General Die Casters works closely with a small group of expert toolmakers to design and build your die. Using 3D modeling software, we verify that every feature will function as expected and meet our performance requirements. We provide updates during the build, and the tool doesn’t reach our production floor until it meets your specifications and approval.
Once a tool is in production, our in-house tool room takes over. We clean and inspect dies, track their usage, and use that information to plan maintenance, repairs, modifications, and replacements. Lead times are project dependent but die cast tooling is typically in the 12-20 week range depending on the size and complexity of the tool.
Already have a die? Our engineers can evaluate existing tooling to determine whether it fits our equipment and can meet your part requirements, so you may be able to keep using the tooling you own.
Quality at Every Step
General Die Casters holds its tooling and manufacturing programs to the highest standards through our robust quality management systems. We have been ISO 9001:2015 certified for many years now, demonstrating an ability to reach a globally recognized standard for quality management.
However, quality is more than just a certificate on the wall. We adhere to all standards outlined by the NADCA. Additional quality management systems include our usage of real-time X-ray units, spectrometers, a Keyence 3D scanner, and several forms of part testing that help confirm a die performs the way it was designed.
General Die Casters: Experts in Die Cast Tool Design Assistance
General Die Casters, located in Twinsburg, Ohio, has delivered custom aluminum die castings since 1957. That experience, combined with modern simulation software and strong toolmaker partnerships, gives our team the knowledge to guide die cast tool design from the first drawing review to the first production run.
Whether you’re launching a new program or need support for an existing die, our engineers focus on the details that protect your schedule and your budget: manufacturability, tool life, and consistent part quality.
Contact General Die Casters today to talk with our team about your die cast tool design needs and how our tooling engineering capabilities can support your next manufacturing program.
FAQs
What Guidance on Tooling Design Does General Die Casters Provide?
We perform extensive design for manufacturability reviews to ensure a healthy program.
Does General Die Casters Use Any Software for Mold Simulation?
Yes. General Die Casters uses MAGMASOFT Flow simulation software for the best mold flow simulations.
How Many Cavities Should My Die Have?
The number of cavities in a given die varies program by program and the cast part’s application.